Trim-Slice Features

Complete Feature List*

CPU and memory

Trim-Slice is based on NVIDIA Tegra 2 – a dual-core ARM Cortex A9 @ 1 GHz with ultra-low-power GeForce GPU with 1 GB DDR2 RAM soldered on-board.


Trim-Slice offers both SATA and dual SD for storage. Trim-Slice Pro incorporates a built-in 32 GB Sata SSD, while Trim-Slice H accepts standard 2.5″ SATA hard disk. All Trim-Slice models have an SD slot on the front and additional micro-SD slot behind a secured door on the side (pictured). Both SD ports support SDHC up to 32 GB.

Video and audio

Trim-Slice supports HDMI 1.3a 1080p and a 2nd DVI-D port supporting resolution up to 1680 x 1050. 5.1 channels audio is available through HDMI and through S/PDIF. In addition there are standard 3.5mm jacks for stereo line-out and line-in. Analog video input port will be made available in the future when SW support for the feature becomes available.

Networking and I/O

Trim-Slice has a Gigabit Ethernet port – implemented through one of the Tegra 2 PCIe ports and a built-in 802.11n WiFi. Bluetooth is provided as a USB dongle. Trim-Slice incorporates 4 USB 2 ports – two on the back and two on the front. On the front panel there is a micro-USB connector for USB device, and a mini connector for RS232.

Build and power

Trim-Slice is built into an all metal case of 5.1″ x 3.7″ x 0.6″ (130mm x 95mm x 15mm). Trim-Slice power supply is 12V DC (8V-16V tolerant) Power consumption is 2-6W depending on devices in use, operating system and CPU/graphics load required by the application.

*Features listed above refer to Trim-Slice Pro model. Other Trim-Slice models are missing some of the features.